EPOXY REPAIR GLUE 5min 56g
€7,55
In stock
It is very good, very solid and hard-component adhesive epoxy putty new generation. It is designed specifically for extreme and permanent repairs. Sealant has no deformation, rust, and it is resistant to chemical media and temperatures from -20 ° C to + 120 ° C. It can be machined, drilled, milled and sanded and painted after curing ink. Glues, sealants and filling cracks and holes in concrete, wood, metals and plastics.
SCOPE OF APPLICATION:
Suitable for metals eg. Steel, iron, aluminum, wood, laminate, ceramic, porcelain, concrete, stone, marble and many plastics. Not suitable for bonding PP, PE, PTFE and rubber.
INSTRUCTIONS FOR USE:
Bonded parts must be clean and free of grease. Cut the necessary amount of material and remove the protective film. Elaborate material so as to have the same color. Vpracujte matter firmly into the repair area. Workability plasticine is 3-4 minutes depending on the temperature. Handling strength achieved after 7-10 minutes. Machined, drilled, milled, sanded and painted over can after 60 minutes. Functional strength achieved after 24 hrs. At room temperature. The minimum working temperature is + 15 ° C. Store in a cool, dry place.
TIP:
For bonding and sealing materials that are exposed to moisture or are placed directly under the water
It is very good, very solid and hard-component adhesive epoxy putty new generation. It is designed specifically for extreme and permanent repairs. Sealant has no deformation, rust, and it is resistant to chemical media and temperatures from -20 ° C to + 120 ° C. It can be machined, drilled, milled and sanded and painted after curing ink. Glues, sealants and filling cracks and holes in concrete, wood, metals and plastics.
SCOPE OF APPLICATION:
Suitable for metals eg. Steel, iron, aluminum, wood, laminate, ceramic, porcelain, concrete, stone, marble and many plastics. Not suitable for bonding PP, PE, PTFE and rubber.
INSTRUCTIONS FOR USE:
Bonded parts must be clean and free of grease. Cut the necessary amount of material and remove the protective film. Elaborate material so as to have the same color. Vpracujte matter firmly into the repair area. Workability plasticine is 3-4 minutes depending on the temperature. Handling strength achieved after 7-10 minutes. Machined, drilled, milled, sanded and painted over can after 60 minutes. Functional strength achieved after 24 hrs. At room temperature. The minimum working temperature is + 15 ° C. Store in a cool, dry place.
TIP:
For bonding and sealing materials that are exposed to moisture or are placed directly under the water
