Motion detector GMD01 Geti

Think about the safety of your family, the security of private and corporate buildings. The Geti GMD01 motion detector with a built-in PIR sensor detects movement in the required areas. Immediately after detecting movement, the sensor transmits a radio signal up to a distance of 150 m from the receiver, which then warns of a disturbance in one of 58 possible melodies. Even a person without technical knowledge can handle the installation. All you have to do is plug the bell into the mains and place the battery-powered sensor in the place to be detected. The motion detector with a PIR sensor can be used in the interiors of apartments, houses, garages, shops, shopping centers and multidisciplinary establishments. You can also use it as a pass detector. It is equipped with a Learning Code function enabling pairing with other receivers, SOS buttons or bells of the Geti GWD series.

Product parameters:

– 58 melodies and 5 volume levels
– LED indication of ringing on the bell and sensor
– LEARNING CODE. The device allows pairing with other bells, sensors, SOS buttons or bells of the GETI GWD series
– it is possible to pair up to 50 receivers or transmitters
– the sensor has two detection modes: a motion detection at intervals of 1-2 seconds
b motion detection at intervals of 5 -8 seconds
– the sensor can be powered by batteries or a micro USB cable not included in the package and is not used to charge the inserted batteries
– easy installation and operation
– low energy consumption

Technical parameters:

– range up to 150 m in free space
– detection area 3-4 mx 110 °
– power supply: bell – AC 230V 50 / 60Hz
sensor – DC 3V 2x AAA batteries / 5V micro USB
– consumption of bell: 0.5W
– frequency: 433MHz ± 2MHz
– volume: 25 – 110 dB
– operating temperature: -15 ° C to 60 ° C
– dimensions: bell – 80 x 80 x 35mm
sensor – 85 x 55 x 35 mm
– package: blister / 20 pcs carton