Router WiFi TENDA AP4

Wi-Fi wireless Tenda AP4 AP Access Point / Universal Repeater Extender / WISP Client Router + / Station Client / Client + AP supports 802.11b / g / n 2.4 GHz, which allows when configured with two antennas communication speeds up to 300 Mb / s. Tenda AP4 contains a Broadcom chipset, which features high transfer speed and real stability. The new chipset also brings Green Wi-Fi mode that dynamically off-chip components, thereby reducing active power consumption. AP4 is suitable for smaller and medium-sized firms and to households. Tenda AP4 includes a Quick Setup you simple and quick setup in a few steps. Thanks to the manual in Czech / Slovak and Polish language you install and configure your new Wi-Fi AP / Extender takes only a few minutes. Tenda AP4 supports many types of security, the strongest WPA2-PSK, the ability to disable broadcast the name of your wireless network SSID, MAC address filtering, VPN, VLAN for each SSID, up to 8x different SSIDs with different zabepečením, power settings, and more superior networking capabilities. The device is equipped with two removable omnidirectional antennas, each with a gain of 5 dBi.

Tenda AP4 provides five operating modes:

Access Point – Access Point – in this mode AP4 connected to the network via Ethernet cable and broadcast your wireless network. Because it contains 2 LAN ports also functions as a switch – Switch, and you can also connect other devices via Ethernet cable.

Extending WiFi signal – Universal Repeater / Universal Range Extender – in this mode you select, to which WiFi network has AP4 connect and extend your signal where it is already weak or fluctuates. WiFi remains the same name, password security, and also reach to dramatically increase. Thus it allows you to interconnect two or more AP / Extender and increase the wireless range even in distant places.

WISP – using this mode, the AP4 connects to a WiFi network, for example. Internet service providers, network providers separated from your network by using routing, and creates your home WiFi network with its own DHCP server.

Client + AP – This mode is very similar fashion Universal Repeater / Extender, however, in this mode you can also set your own WiFi network, security, password, etc. AP4 is connected to the first WiFi network, and create a second WiFi network, both networks and devices communicate with each other directly in a LAN network.

Station – AP4 connects to the WiFi network and provides connectivity for two LAN ports which contains connector for two devices via cable. Other Wi-Fi network is not broadcasting anymore.

Properties:

– Speed ​​WiFi 11n: Up to 300Mbps dynamic 11g: Up to 54Mbps dynamic 11b: Up to 11Mbps dynamic
– Modes of operation: Access Point, Universal Repeater Extender, Station Client, WISP Client Router + Client + AP
– WiFi function: 8x SSID, turn on / off WiFi, Broadcast SSID, SSID hiding once the limit has been reached client limit clients to the SSID, power output, AP isolation RSSI threshold for WiFi clients, WMM Capable, APSD Capable, verification approach based on MAC addresses of WiFi client list, VLAN for multi SSID
– Air Security: WEP 64/128, WPA-PSK, WPA2-PSK WPA WPA2-PSK WPA WPA2
– LED: SYS, WPS, Bridge, WiFi, LAN1, LAN2
– Passive PoE: Power up to 40 meters using passive PoE Switches included cable, Cat5e and higher
– Design / Installation: Desktop / On the Wall
– Max. WiFi clients: 20+
– Diagnostic tools: Wireless Site Survey, Ping, Traceroute
– Services: Default Restart HTTP / HTTPS
– Central management: using Tenda AC500
– Sensitivity: b mode: 1M -89dBm @ 8, 11M -87dBm @ 8 PER, g mode: 54M -74dBm @ 8 PER, n mode: 72.2 -72dBm @ 8 PER 150M -70dBm @ 8 PER
– Frequency: 2.4GHz-2.483GHz
– LAN settings: Static IP, Dynamic IP
– DHCP Server, DHCP Server, Clients List
– VPN Pass-through: PPTP, L2TP
– Chipset: Broadcom
– QoS: 802.11e WMM
– Management functions: Restart, Restore to factory settings, system logs, update firmware, set the time and date, Backup / Restore Configuration Management users
– Temperature: Operating: -10 ℃ ~ 45 ℃, Storage: -30 ℃ ~ 70 ℃
– Humidity: Operating: 10 ~ 90 non-condensing, operating: 5 ~ 90 non-condensing
– The default IP address 192.168.0.254, Username: admin, password: admin
– Certification: FCC / CE / Rohs / VOC
– Buttons: Reset 1x, 1x Range Extender
– Aerials: 2x detachable 5dBi omnidirectional antenna connector RP-SMA
– Interfaces: 2x 10 / 100M Ethernet Port RJ45
– Standards, Protocols: IEEE 802.11n / g / b
– Dimensions: 148 x 146.2 x 31.5 mm